Description: Moderate temperature silver brazing alloys
A moderate temperature filler metal with flow characteristics useful for wider gaps.
|Chemical Composition||Solidus||Liquidus||Fluidity Rating||AWS|
|Cu – 38%
Zn – 32%
Ag – 30%
TECHNICAL INFORMATION SHEET
SAFETY SILV® 30 BRAZING FILLER METAL
THE HARRIS PRODUCTS GROUP
NOMINAL CHEMICAL COMPOSITION %:
Solidus 1250° F (677° C)
Liquidus 1410° F (765° C)
Density 5.14 ounces per cu.in
Electrical Conductivity 24.8% IACS
Safety Silv 30 brazing filler metal is primarily designed for brazing copper, brass, and steel. This alloy has a wider melting range which allows use where part clearance cannot be tightly controlled. Safety Silv 30 is often selected as a lower cost, cadmium free, and replacement for higher silver content alloys. Safety Silv 30 should be heated at a rapid rate through its melting range to avoid liquation.
Generally similar to the copper base metal, but zinc containing alloys, including Safety Silv 30, should not be used if the braze
is exposed to concentrated corrosive liquid for a long period of time
Standard wire diameters in coils and rod
Formed braze rings and shapes
Flux coated rod
ANSI/AWS A5.8 Class BAg-20, ASME SFA5.8 Class BAg-20,
QQ-B-654A BAg-20, ISO 17672 Ag 230
Stay-Silv® white flux is suitable for many applications. Stay-Silv® black brazing flux is often used if brazing stainless steel or where heating cycles are prolonged or focused as in induction brazing. Harris ECO SMART® boric acid free flux, (powder or paste), is an excellent choice to promote sound brazed assemblies and comply with European REACH requirements.
WARNING: PROTECT yourself and others. Read and understand this information.
FUMES AND GASES can be hazardous to your health. HEAT RAYS, (infrared radiation) from flame or hot metal can injure eyes.
|Before use, read and understand the manufacturer’s
instructions, Safety Data Sheets (SDS), and your employer’s
Keep your head out of fumes.
Use enough ventilation, exhaust at the flame, or heat
source, to keep fumes and gases from your breathing zone
and the general area.
Wear correct eye, ear, and body protection.
See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669
Doral Blvd., Doral, Florida 33166; OSHA Safety and Health Standards,
available from the U.S. Government Office, Washington, DC 20402
STATEMENT OF LIABILITY- DISCLAIMER:
Any suggestion of product applications or results is given without representation or warranty, either expressed or implied. Without exception or limitation, there are no warranties of merchantability or of fitness for particular purpose or application. The user must fully evaluate every process and application in all aspects, including suitability, compliance with applicable law and non infringement of the rights of others. The Harris Products Group and its affiliates shall have no liability in respect thereof.